One only End Grain Chopping Board

Made from Oak and Meranti weighing in at 3.6 kg.

Handmade in England and comes with a free sample of rejuvenating board butter to keep it maintained.

Dimensions:

Length 47.5cm / 18 + 3/4 inches

Width 28cm / 11 inches

Depth - 4 cm / 1.5 inches

Chopping Board - End Grain Oak Accent

£85.00

Made from End Grain Oak & Meranti

Length 47.5cm / 18 + 3/4 inches Width 28cm / 11 inches Depth - 4 cm / 1.5 inches

Handmade in England - free sample of board butter.

Gift wrapped with tissue paper, brown paper and ribbon.

Transported in a double-walled plain card box and maintenance guide.
We give each board 3 coatings of mineral oil and leave to soak each time then we apply a generous coating of beeswax. All glues and treatments are totally food safe.

Cleaning Your Board

A quick scrubbing with warm soapy water then dry it off with a towel and stand on its edge to allow airflow around it. Never place it flat on a surface to dry as this will invite warpage.

To remove garlic and onion smells from the board just use either lemon or vinegar leave for a few minutes then rinse.

Maintaining Your Board

Making sure your board is dry then we would suggest using mineral oil for chopping boards. Regular application all over will ensure the wood is kept conditioned. To finish we use beeswax to seal the oil in.

Remember these Don'ts

As with any natural product, your board needs looking after. It will age, mature and show signs of use just as any other product does.

Don't Submerse in water for a prolonged period of time.

Use in a dishwasher is a NO

Clean with bleach or other cleaning chemicals.

Don't treat the board with alcohol (that's for you!)

Don't treat the board with NUT or SEED oils or any vegetable oils. This will cause a rancid smell.
If we have it in the stock room then we send it straight away! Next day delivery of course giving the item less time to be booted around in the system.

We will use many different carriers available depending on the time of year. It can take 5 - 10 days due to the process involved in the personalisation requiring further treatments using mineral oil etc.

For up to date information or delivery outside of the UK then please do contact us. Details on the contact page...

Important Notice:

All personalised products WILL take 2 days extra to process.

Treatment with mineral oils and beeswax can only be performed AFTER the laser or carve engraving. Please bear this in mind!
All the woods used are sourced from reputable timber merchants with membership of the Forestry Stewardship Council, and a chain of custody system to ensure all timber they supply is ethically and responsibly sourced. We will never knowingly use illegally harvested or prohibited species listed as endangered.

All of our packaging is fully recyclable. Even the product itself is!

Our products are made by hand using small non automated machinery so there are slight differences in sizes. We aim to have minimal waste from our timber so if you have a slightly larger board than stated then we have achieved our aim!